Determining Your EV3 Windshield Type
Identifying the exact replacement windshield for this compact electric crossover depends entirely on whether your vehicle is fitted with the factory 12-inch Head-Up Display (HUD). Higher trim levels like the GT-Line project navigation prompts and vehicle speed directly onto the glass, requiring a dedicated wedge-shaped interlayer to prevent a double or blurred image. Base and mid-tier trims lack this projection area and use a standard acoustic profile.
Beyond the display type, all variations feature solar-control green-tinted lamination, an integrated forward-facing multi-function camera bracket positioned behind the rearview mirror, and an embedded rain sensor bracket set into the upper ceramic frit. A clean optical gel pad must be installed whenever transferring the rain sensor to the new glass, or your automatic wipers will sweep erratically across dry glass.
| Windshield Feature | Standard Model | GT-Line Trim |
|---|---|---|
| 12-inch HUD Projection Zone | No | Yes |
| Forward-Facing Safety Camera Bracket | Yes | Yes |
| Rain Sensor Mounting Plate | Standard | Standard |
| Solar Heat-Rejecting Tint | Yes | Yes |
| Driver Side VIN Notch | Yes | Yes |
Exterior Trim and Surrounding Hardware
The glass on this vehicle sits flush against several aerodynamic components that require careful handling during replacement. Flanking both sides of the windshield are high-gloss black A-pillar exterior trim panels. Because these mouldings manage high-speed air deflection over the cabin to maximize EV driving range, their hidden clips must remain intact so the pillars seat perfectly tight against the glass edge.
The bottom edge of the glass terminates beneath a two-piece plastic cowl grille that conceals the recessed front wiper arms and motor assemblies. If a highway rock chips or splits the laminated glass, I bring the replacement glass directly to your driveway or office parking spot anywhere in Toronto and the GTA to carry out the work on site. While working, the cowl pieces and the upper roof edge channel are unclipped to expose the factory glass perimeter without marring the high-gloss gloss trim.
Aftermarket Availability and Sourcing
Because this vehicle is new to the market, replacement glass supply can vary. In the aftermarket glass catalog, the primary glass profile is cataloged under NAGS part number FW06482, matching the vehicle's structural opening across the 2025 through 2027 build cycle.
Every replacement windshield includes the lower driver-side VIN viewing window and the acoustic barrier layer needed to keep low-frequency road buzz and electric motor inverter frequencies from penetrating the cabin. Ensuring your replacement panel matches the exact camera bracket and HUD requirements of your specific trim ensures all integrated hardware remounts cleanly in its original factory location.
